Controlling A System; Sending A Message To A Viewstation - Polycom ViewStation H.323 User Manual

Controlling a System

To use the on-screen remote control, you must be using Internet Explorer 4.0 or 5.0
Note
as your web browser.

Sending a Message to a ViewStation

© Polycom, Inc.
The interactive on-screen remote control can be accessed by clicking on the
Remote Control icon on the left side of the System Diagnostics web page.
By clicking the on-screen buttons, you can control most of the functions of
a ViewStation. See the Getting Started section of this document for
information about the buttons on the remote control.
From the System Diagnostics web page, you can click on the Send Message
icon on the left side of the page to send a message to a ViewStation. When
the Send a Message web page appears, type in your message and click on
the Send Message button. A yellow notepad with your message appears for
approximately 15 seconds on the ViewStation. Only the near site can see
your message.
57
Chapter 9 Remote Management
ViewStation H.323 User's Guide