Controlling A System; Sending A Message To A Viewstation Fx Or A Vs4000 - Polycom ViewStation FX User Manual

Chapter 3

Controlling a System

Sending a Message to a ViewStation FX or a VS4000

ViewStation FX/VS 4000 User's Guide
perform are in real-time. For more information about the types of
diagnostic tests you can perform, refer to Chapter 5, System
Information and Diagnostics.
From the System Diagnostics web page, click on the Remote
Control icon to use the web interface remote control. You can control
most of the functions of a ViewStation FX or VS4000.
Note To use the on-screen remote control, you must use Internet
Explorer 4.0 or higher as your web browser.
From the System Diagnostics web page, click on the Send Message
icon to send a message to a ViewStation FX or VS4000. The text
message can be up to 100 characters in length. When the Send a
Message web page appears, type in your message and click on the
SEND MESSAGE button. Your message appears on screen for 15
seconds. The message appears only on the screen of the
ViewStation FX or VS4000 that you are managing.
Using the ViewStation FX or the VS4000 with a PC
94 www.polycom.com