Juniper ACX1000 Configuration Manual page 1944

ACX Series Universal Access Router Configuration Guide
Description
Options
1886
Command introduced in Junos OS Release 17.2 for vMX on NFX250 Network Services
Platform.
Command introduced in Junos OS Release 17.2 for PTX10008 Routers.
Command introduced in Junos OS Release 17.3 for MX10003 3D Universal Edge Routers.
Display environmental information about the router or switch chassis, including the
temperature and information about the fans, power supplies, and Routing Engine.
In addition, on ACX4000 routers, display temperature information about the different
channels of a Modular Interface Card (MIC). The number of channels displayed depends
on the type of MIC installed.
Starting with Junos OS Release 14.1, the
ccg ccg-slot-number | fpc fpc-slot-number | fpm | monitored | pdu pdu-slot-number |
routing-engine re-slot-number | sib sib-slot-number
displays environmental information for the new DC power supply module (PSM) and
power distribution unit (PDU) that are added to provide power to the high-density FPC
(FPC2-PTX-P1A) and other components in a PTX5000 Packet Transport Router.
none—Display environmental information about the router or switch chassis. On a TX
Matrix router, display environmental information about the TX Matrix router and its
attached T640 routers. On a TX Matrix Plus router, display environmental information
about the TX Matrix Plus router and its attached routers.
all-members—(MX Series routers and EX Series switches only) (Optional) Display chassis
environmental information for all the members of the Virtual Chassis configuration.
adc adc-slot-number—(MX2010, MX2020, and MX2008 routers only) (Optional) Display
chassis environmental information for the adapter cards. For MX2020 routers, replace
with a value from
adc-slot-number
replace
adc-slot-number
cb cb-slot-number—(ACX Series Universal Access Routers, EX Series switches, M120,
M320, and M40e routers, MX Series routers, MX2020 routers, MX2010 routers,
MX2008 routers, PTX Series Packet Transport Routers, QFX Series, and T Series
routers, and TX Matrix Plus routers only) (Optional) Display chassis environmental
information for the Control Board. On devices other than EX Series switches, replace
with or .
cb-slot 0 1
cip cip-slot-number—(TX Matrix Plus routers only) (Optional) Display chassis
environmental information for the Connection Interface Panel (CIP). Replace the
variable with a value of
cip-slot-number
cb interconnect-device name—(QFabric systems only) (Optional) Display chassis
environmental information for the Control Board on an Interconnect device.
ccg ccg-slot-number—(PTX Series only) (Optional) Display chassis environmental
information for the Centralized Clock Generator. Replace
or .
1
show chassis environment cb cb-slot-number |
operational mode command output
through . For MX2010 and MX2008 routers,
0 19
with a value from through
0
or .
0 1
.
9
with a value of
cb-slot
Copyright © 2017, Juniper Networks, Inc.
0