Show Chassis Feb - Juniper ACX1000 Configuration Manual

show chassis feb

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 125: show chassis feb
Field Name Field Description
State of the FEB:
State
Copyright © 2017, Juniper Networks, Inc.
show chassis feb
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 12.2 for the ACX Series Universal Access
Routers.
(ACX Series routers, and M5, M10, and M120 routers only) Display Forwarding Engine
Board (FEB) status information.
This command has no options.
view
request chassis feb on page 1802
show chassis fabric feb
show chassis fpc-feb-connectivity
feb
Understanding Switching Control Board Redundancy
show chassis feb (M10 Router) on page 2014
show chassis feb (M120 Router) on page 2014
show chassis feb detail (M120 Router) on page 2015
show chassis feb detail (ACX2000 Universal Access Router) on page 2016
show chassis feb detail (ACX1000 Universal Access Router) on page 2016
Table 125 on page 2013 lists the output fields for the
fields are listed in the approximate order in which they appear.
—FEB is powered down.
Offline
Online —FEB is operational and running.
Check —FEB is in alarmed state where the Switch Interface Board (SIB) plane is partially operational
for the following reasons:
FEB is not inserted properly.
Two or more links between the FEB and Packet Forwarding Engine fail.
Chapter 42: Operational Commands
show chassis feb command. Output
2013