Juniper ACX1000 Configuration Manual page 2077

Copyright © 2017, Juniper Networks, Inc.
version levels for the firmware on the TX Matrix Plus router and on all the routers
connected to the TX Matrix Plus router.
all-members—(MX Series routers only) (Optional) Display the version levels of the
firmware running for all members of the Virtual Chassis configuration.
interconnect-device name—(QFabric systems) (Optional) Display the version levels of
the firmware running on the Interconnect device.
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display version levels for the firmware on a specified T640 router (line-card chassis)
that is connected to the TX Matrix router. On a TX Matrix Plus router, display the
version levels for the firmware on a specified router (line-card chassis) that is
connected to the TX Matrix Plus router.
Replace number with the following values depending on the LCC configuration:
0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
local—(MX Series routers only) (Optional) Display the version levels of the firmware
running for the local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display the version levels of
the firmware running for the specified member of the Virtual Chassis configuration.
Replace with a value of 0 or 1.
member-id
node-device—(QFabric systems only) (Optional) Display the version levels of the firmware
running on the Node device.
satellite [slot-id slot-id | device-alias alias-name]—(Junos Fusion only) (Optional)
Display version levels of the firmware running for the specified satellite device or
devices in a Junos Fusion, or for all satellite devices if no satellite devices are specified.
scc—(TX Matrix router only) (Optional) Display version levels for the firmware on the TX
Matrix router (switch-card chassis).
sfc number—(TX Matrix Plus router only) (Optional) Display version levels for the firmware
on the TX Matrix Plus router (or switch-fabric chassis). Replace
detail—(EX3200, EX3300, EX4200, and EX4500 standalone and Virtual Chassis member
switches only) (Optional) Display version levels of the firmware running on the switch
for its programmable hardware components.
Chapter 42: Operational Commands
with .
number 0
2019