Juniper ACX1000 Configuration Manual page 2055

Output Fields
Table 123: show chassis environment pem Output Fields
Field Name Field Description
PEM slot status Number of the PEM slot.
State Status of the PEM.
Temperature of the air flowing past the PEM.
Temperature
Status of the AC input for the specified component
AC Input
Status of the AC output for the specified component.
AC Output
Status of the DC input for the specified component.
DC input
Status of the DC output for the specified component.
DC output
(Not available on M40e or M160 routers) Information about the load on supply, in percentage of rated
Load
current being used.
(M120, M160, M320, T640, T1600, TX Matrix, and TX Matrix Plus routers only) Information about
Voltage
voltage supplied to the PEM.
(MX104 routers only) Information about voltage supplied by the PEM to the system.
(T640, T1600, TX Matrix, and TX Matrix Plus routers only) Information about the PEM current.
Current
(T640, T1600, TX Matrix, and TX Matrix Plus routers only) Information about the PEM power.
Power
(T640, T1600, TX Matrix, and TX Matrix Plus routers only) SONET Clock Generator/Control
SCG/CB/SIB
Board/Switch Interface Board.
(T640, T1600, and T4000 routers with six-input DC power supply only) Information about the DC
FAN
output to the fan.
Sample Output
show chassis environment pem (M40e Router)
Copyright © 2017, Juniper Networks, Inc.
show chassis environment pem node-device (QFabric System) on page 2004
show chassis environment pem (QFX Series and OCX Series) on page 2004
show chassis environment pem interconnect-device (QFabric System) on page 2004
Table 123 on page 1997 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
user@host> show chassis environment pem
PEM 0 status:
State
Temperature
AC input
DC output
Chapter 42: Operational Commands
show chassis environment pem
Online
OK
OK
OK
1997