Juniper ACX1000 Configuration Manual page 2076

ACX Series Universal Access Router Configuration Guide
Syntax (ACX5048 and
ACX5096 Routers)
Syntax (ACX500
Routers)
Syntax (EX Series
Switches)
Release Information
Description
Options
2018
show chassis firmware
interconnect-device name
node-device name
show chassis firmware
show chassis firmware
<detail>
<satellite [slot-id slot-id |device-alias alias-name]>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.4 for EX Series switches.
sfc option introduced in Junos OS Release 9.6 for the TX Matrix Plus router.
Command introduced for EX8200 switches in Junos OS Release 10.2 for EX Series
switches.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Command introduced in Junos OS Release 12.3 for MX2010 and MX 2020 3D Universal
Edge Routers, and ACX4000 Universal Access Routers.
Command introduced in Junos OS Release 13.2 for MX104 3D Universal Edge Routers.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Command introduced in Junos OS Release 15.1X54-D20 for ACX5048 and ACX5096
Routers.
option introduced in Junos OS Release 14.2R3.
satellite
Command introduced in Junos OS Release 17.2 for vMX on NFX250 Network Services
Platform.
Command introduced in Junos OS Release 17.2 for MX2008 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.2 for PTX10008 Routers.
Command introduced in Junos OS Release 17.3 for MX10003 3D Universal Edge Routers.
On routers and switches, display the version levels of the firmware running on the System
Control Board (SCB), Switching and Forwarding Module (SFM), System and Switch
Board (SSB), Forwarding Engine Board (FEB), Flexible PIC Concentrators (FPCs), and
Routing Engines. On a TX Matrix Plus router, display the version levels of the firmware
running on the FPCs and the Switch Processor Mezzanine Board (SPMBs).
On EX2200, EX3200, EX4200, QFX Series, and OCX Series switches, display the version
levels of the firmware running on the switch. On an EX8208 switch, display the version
levels of the firmware running on the Switch Fabric and Routing Engine (SRE) modules
and on the line cards (shown as FPCs). On an EX8216 switch, display the version levels
of the firmware running on the Routing Engine (RE) modules and on the line cards (shown
as FPCs).
none—Display the version levels of the firmware running. For an EX4200 switch that is
a member of a Virtual Chassis, display version levels for all members. For a TX Matrix
router, display version levels for the firmware on the TX Matrix router and on all the
T640 routers connected to the TX Matrix router. For a TX Matrix Plus router, display
Copyright © 2017, Juniper Networks, Inc.