Download Print this page

Channelizing Interfaces - Juniper ACX5048 Manual

Universal access router
Hide thumbs Also See for ACX5048:

Advertisement

ACX5048 and ACX5096 Universal Access Router

Channelizing Interfaces

Related
Documentation
22
10 Gbps direct attach copper (DAC) cables
Ports
through
support:
96
104
40 Gbps QSFP+ transceivers
Additionally ports
and
96
QSFP+ direct attach copper (DAC) cables
QSFP+ to SFP+ direct attach copper break out (DACBO) cables
QSFP+ to SFP+ fiber break out cables
See
"Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for an ACX5000
Router" on page 62
and
"Interface Specifications for SFP+ DAC Cables for an ACX5000
Router" on page
77. All 96 of these ports can be used for SFP+ transceivers or SFP+
direct attach copper (DAC) cables. You can use 1-Gigabit Ethernet SFP+,
10-Gigabit Ethernet SFP+ transceivers and SFP+ direct attach copper cables in any
access port.
CAUTION:
Do not place a copper transceiver in an access port directly above
or below another copper transceiver. Internal damage to the access ports
and router can occur. We recommend either using the top port row exclusively,
or bottom port row exclusively, for copper transceivers.
The port panel of an ACX5096 supports up to a maximum of 104 logical 10 GbE ports
that can be distributed over 96 small form-factor pluggable plus (SFP+) and 8 quad
small-form factor pluggable plus (QSFP+) transceivers . Because of an 104 port restriction,
only two of the eight QSFP+ can be channelized. Depending on how you set the system
mode for channelization, the behavior of channelization for the QSFP+ changes. The
following system modes are available for the ACX5096 router:
Non-oversubscribed
All 96 SFP+ ports on the router (PIC 0) are supported. In this mode, the eight QSFP+
ports are not supported and cannot be channelized. There is no packet loss for packets
of any size in this mode.
Default mode
All 96 SFP+ ports on the router (PIC 0) are supported. QSFP+ ports
be channelized. If ports
96
,
, and
are disabled.
101
102
103
Access Port and Uplink Port LEDs on an ACX5000 Router on page 26
support:
100
and
100
are channelized, the interfaces on ports
and
96
100
97
,
Copyright © 2015, Juniper Networks, Inc.
can
98
,
99
,

Advertisement

loading

This manual is also suitable for:

Acx5096Acx5000Acx5048-acAcx5048-dcAcx5096-acAcx5096-dc