Juniper ACX1000 Configuration Manual page 2065

Syntax (ACX5048 and
ACX5096 Routers)
Syntax (ACX500
Routers)
Release Information
Description
Options
Copyright © 2017, Juniper Networks, Inc.
show chassis environment routing-engine
show chassis environment routing-engine
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced in Junos OS Release 9.6 for the TX Matrix Plus router.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Command introduced in Junos OS Release 12.1 for the PTX Series Packet Transport
Routers and T4000 Core Routers.
Command introduced in Junos OS Release 12.3 for MX2010 and MX2020 3D Universal
Edge Routers.
Command introduced in Junos OS Release 13.2 for MX104 3D Universal Edge Routers.
Command introduced in Junos OS Release 15.1X54-D20 for ACX5048 and ACX5096
Routers.
Command introduced in Junos OS Release 17.2 for MX2008 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.2 for vMX on NFX250 Network Services
Platform.
Command introduced in Junos OS Release 17.2 for PTX10008 Routers.
Command introduced in Junos OS Release 17.3 for MX10003 3D Universal Edge Routers.
Display Routing Engine environmental status information.
none—Display environmental information about all Routing Engines. For a TX Matrix
router, display environmental information about all Routing Engines on the TX Matrix
router and its attached T640 routers. For a TX Matrix Plus router, display
environmental information about all Routing Engines on the TX Matrix Plus router
and its attached routers.
all-members—(MX Series routers only) (Optional) Display environmental information
about the Routing Engines in all member routers in the Virtual Chassis configuration.
interconnect-device name—(QFabric systems only) (Optional) Display environmental
information about the Routing Engines for the Interconnect device.
lcc number——(TX Matrix router and TX Matrix Plus router only) (Optional) Line-card
chassis number.
Replace number with the following values depending on the LCC configuration:
0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
Chapter 42: Operational Commands
2007