Ptx1000 Alarm Messages Overview; Chassis Alarm Messages On The Ptx1000 - Juniper PTX1000 Hardware Manual

PTX1000 Alarm Messages Overview

When the Routing Engine detects an alarm condition, it lights the red or yellow alarm LED on the
management panel as appropriate. To view a more detailed description of the alarm cause, issue the
show chassis alarms CLI command:
user@host> show chassis alarms
2 alarms currently active
Alarm time
2017-01-23 02:39:29 PST
2017-01-23 02:39:29 PST

Chassis Alarm Messages on the PTX1000

Chassis alarms indicate a failure on the device or one of its components. Chassis alarms are preset and
cannot be modified.
Chassis alarms on PTX1000 routers have two severity levels:
Major (red)—Indicates a critical situation on the device that has resulted from one of the conditions
described in Table 31 on page
Minor (yellow or amber)—Indicates a noncritical condition on the device that, if left unchecked, might
cause an interruption in service or degradation in performance. A yellow alarm condition requires
monitoring or maintenance.
Table 31 on page 116 describes the chassis alarm messages on the PTX1000.
Class Description
Major PEM 3 Not Present
Major PEM 1 Not Present
116. A red alarm condition requires immediate action.
115