Tacacs+ Commands - Dell Z9500 Command Reference Manual

TACACS+ Commands

The Dell Networking OS supports TACACS+ as an alternate method for login authentication.
debug tacacs+
To assist with troubleshooting, view TACACS+ transactions.
Z9500
Syntax
debug tacacs+
To disable debugging of TACACS+, use the no debug tacacs+ command.
Defaults Disabled.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.2.1.0
ip tacacs source-interface
Specify an interface's IP address as the source IP address for TACACS+ connections.
Z9500
Syntax
ip tacacs source-interface interface
To delete a source interface, use the no ip tacacs source-interface
command.
Parameters
interface
1636
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the following keywords and slot/port or number
information:
Security