Tacacs+ Cli Commands - Dell PowerConnect 5324 User Manual

Removing a TACACS+ Server
1
Open the TACACS+ Settings page.
2
Click Show All.
The TACACS+ Table opens.
3
Select a TACACS+ Table entry.
4
Select the Remove check box.
5
Click Apply Changes.
The TACACS+ server is removed, and the device is updated.
Defining TACACS+ Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
TACACS+ Settings page.
Table 6-41. TACACS+ CLI Commands
CLI Command
TACACS-server host (ip-
address | hostname) [single-
connection] [port port-
number] [timeout timeout]
[key key-string] [source
source] [priority priority]
no TACACS-server host (ip-
address | hostname)
tacacs-server key key-string
tacacs-server timeout timeout Specifies the timeout value in seconds. (Range: 1
168
Configuring System Information
Description
Specifies a TACACS+ host.
Deletes a TACACS+ host.
Specifies the authentication and encryption key
for all TACACS+ communications between the
device and the TACACS+ server. This key must
match the encryption used on the TACACS+
daemon. (Range: 0 - 128 characters.)
- 30.)