General Information About The Page; Figure 47: Wbm Browser Window (Example); Figure 48: Wbm Header With Tabs That Cannot Be Displayed (Example) - WAGO I/O System 750 Manual

WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR
8.8.1.2

General Information about the Page

The IP address of the active device is displayed in the entry line of the browser
window.
The WBM pages are only displayed after logging in. To log in, enter your
username and password in the login window and click the [Login] button.

Figure 47: WBM Browser Window (Example)

The tabs for the various WBM areas and the [Reboot] and [Logout] buttons are
displayed in the header of the browser window. The [Reboot] button only
appears if you are logged in as an administrator.
If not all tabs can be displayed in the selected width of the window, a tab with
ellipsis (...) is displayed instead of the tabs that cannot be displayed. This allows
you to select the tabs (not shown) using a pull-down menu.

Figure 48: WBM Header with Tabs that Cannot be Displayed (Example)

The navigation tree is shown on the left of the browser window. The content of
the navigation tree depends on the selected tab.
You can use this navigation tree to go to the individual pages and, where
provided, subpages included in these pages.
The current device status is displayed in the status bar.
Version 1.7.0, valid from FW Version 04.01.10(23)
Commissioning 125
Manual