Developing Rotary; Overview Of The Developing Rotary - Canon iR C6800 Series Service Manual

Chapter 7

7.6 Developing Rotary

7.6.1 Overview of the Developing Rotary

0003-1164
The developing rotary serves to position a color developing assembly to a specific point.
Housed inside the rotary are 3 types of color developing assemblies (M, Y, C) and color toner cartridges (M, Y, C).
When printing occurs, the developing rotary motor (M5) rotates to turn the rotary counterclockwise so that one of
the 3 color developing assemblies will come face to face with the photosensitive drum in sequence.
The rotary is locked in or out of place by the work of the developing rotary locking solenoid (SL10).
The rotary is equipped with 2 sensors (PS19, PS8), serving to detect the position of the rotary assembly and to turn
on and off SL10.
The machine uses the DC controller to control these electrical loads: M5, SL10, PS19, PS8.
DC-CON
M5
PS19
PS8
SL10
C developing
Developing assembly
rotary C toner
assembly
M toner
Y developing
assembly
M developing
assembly
Y toner
F-7-32
DC CON: DC controller
M5: developing rotary motor
PS8: developing rotary solenoid sensor
PS19: developing rotary home position sensor
SL10: developing rotary fixing solenoid
7-37