Set Service-Profile Soda Failure-Page - 3Com WX4400 Command Reference Manual

set service-profile
soda failure-page
When the enforce checks option is enabled, upon successful completion
of the SODA agent checks, the client performs an HTTP Get operation to
load the success page. Upon loading the success page, the client is
granted access to the network.
In order for the client to load the success page, you must make sure the
SODA agent is configured (through SODA Manager) with the correct URL
of the success page, so that the WX switch can serve the page to the
client.
Similarly, you must make sure the SODA agent is configured with the
correct URLs of the failure and logout pages, so that when the client
requests these pages, the WX switch can serve those pages as well.
Examples — The following command allows network access to clients
after they have downloaded the SODA agent, but without requiring that
the SODA agent checks be completed:
WX4400# set service-profile sp1 enforce-checks disable
success: change accepted.
See Also
display service-profile on page 330
set service-profile soda mode on page 418
Specifies a page on the WX switch that is loaded when a client fails the
security checks performed by the SODA agent.
Syntax — set service-profile name soda failure-page page
name — Service profile name.
page — Page that is loaded if the client fails the security checks
performed by the SODA agent.
Defaults — By default, the WX switch dynamically generates a page
indicating that the SODA agent checks have failed.
Access — Enabled.
History —Introduced in MSS Version 4.2.

set service-profile soda failure-page

415