Display Port Poe - 3Com WX4400 Command Reference Manual

76 C 4: P
HAPTER ORT

display port poe

C
OMMANDS
See Also
display port mirror on page 75
set port mirror on page 90
Displays status information for ports on which Power over Ethernet (PoE)
is enabled.
Syntax —
display port poe [port-list]
port-list
PoE information is displayed for all ports.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays PoE information for all
ports on a WX1200 switch:
WX1200# display port poe
Port Name
============================================================
1 1
2 2
3 3
4 4
5 5
6 6
Table 12 describes the fields in this display.
Table 12 Output for display port poe
Field
Port
Name
— List of physical ports. If you do not specify a port list,
Link Port
Status
up
down
down
down
down
down
Description
Port number.
Port name. If the port does not have a name, the
port number is listed.
PoE PoE
Type config
- disabled
- disabled
- disabled
MAP enabled 1.44
- disabled
- disabled
Draw
off
off
off
off
off