Commands By Usage - 3Com WX4400 Command Reference Manual

17
Commands by
Usage
802.1X M
C
OMMANDS
Use 802. IEEE X management commands to modify the default settings
for IEEE 802.1X sessions on an WX switch. For best results, change the
settings only if you are aware of a problem with the WX switch's 802.1X
performance.
CAUTION: 802.1X parameter settings are global for all SSIDs configured
on the switch.
This chapter presents 802.1X commands alphabetically. Use Table 86 to
locate commands in this chapter based on their use. For information
about configuring 802.1X commands for user authentication, see "AAA
Commands" on page 205.
Table 86 802.1X Commands by Usage
Type
Wired Authentication Port
Control
Keys
Bonded Authentication
Reauthentication
ANAGEMENT
Command
set dot1x port-control on page 558
clear dot1x port-control on page 547
set dot1x authcontrol on page 554
set dot1x key-tx on page 556
set dot1x tx-period on page 562
clear dot1x tx-period on page 551
set dot1x wep-rekey on page 563
set dot1x wep-rekey-period on page 564
clear dot1x bonded-period on page 546
set dot1x bonded-period on page 555
set dot1x reauth on page 559
set dot1x reauth-max on page 560