3Com WX4400 Command Reference Manual page 314

314 C 11: M
HAPTER ANAGED
A P C
CCESS OINT OMMANDS
Table 55 Output for display ap status (continued)
Field
State
CPU info
Uptime
Description
State of the MAP:
init — The MAP has been recognized by the WX but has
not yet begun booting.
booting — The MAP has asked the WX for a boot
image.
image downloading — The MAP is receiving a boot
image from the WX.
image downloaded — The MAP has received a boot
image from the WX and is booting.
configuring — The MAP has booted and is ready to
receive or is already receiving configuration parameters
from the WX.
operational — The MAP has received configuration
parameters for one or more radios and is ready to accept
client connections.
configure failure — One or more of the radio
parameters received from the WX is invalid.
For Distributed MAPs, this field also indicates whether the
MAP's management traffic with the WX is encrypted, and
whether the MAP's fingerprint has been verified on the WX:
not encrypted—The management session is not
encrypted.
encrypted but fingerprint not verified—The MAP's
management traffic is encrypted, but the MAP's
fingerprint has not been verified in MSS.
encrypted and verified—The MAP's management traffic is
encrypted and the MAP's fingerprint has been verified in
MSS.
Specifications and identification of the CPU.
For MAP models MP-352, MP-341, and MP-52, the ID
portion of this field is not applicable.
Amount of time since the MAP last rebooted using this link.
Note: This field is displayed only when this link is the MAP
access point's primary link.