Mobility; Commands By Usage - 3Com WX4400 Command Reference Manual

9
Commands by
Usage
M
OBILITY
Use Mobility Domain commands to configure and manage Mobility
Domain groups.
A Mobility Domain is a system of WX switches and MAP access points
working together to support a roaming user (client). One WX switch acts
as a seed switch, which maintains and distributes a list of IP addresses of
the domain members.
3Com recommends that you run the same MSS version on all the WX
switches in a Mobility Domain.
This chapter presents Mobility Domain commands alphabetically. Use
Table 44 to locate commands in this chapter based on their use.
Table 44 Mobility Domain Commands by Usage
Type
Mobility Domain
D
OMAIN
Command
set mobility-domain mode seed domain-name on
page 275
set mobility-domain member on page 273
set mobility-domain mode member seed-ip on page 274
display mobility-domain status on page 272
display mobility-domain config on page 271
clear mobility-domain member on page 270
clear mobility-domain on page 270
C
OMMANDS