Display Roaming Vlan - 3Com WX4400 Command Reference Manual

112 C 5: VLAN C
HAPTER
display roaming
vlan
OMMANDS
Shows all VLANs in the mobility domain, the WX switches servicing the
VLANs, and their tunnel affinity values configured on each switch for the
VLANs.
Syntax —

display roaming vlan

Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command shows the current roaming
VLANs:
WX4400# display roaming vlan
VLAN
---------------- --------------- --------
vlan-cs
vlan-eng
vlan-fin
vlan-it
vlan-it
vlan-pm
vlan-sm
vlan-tp
vlan-tp
Table 22 describes the fields in the display.
Table 22 Output for display roaming vlan
Field
VLAN
WX
Affinity
See Also
display roaming station on page 110
display vlan config on page 115
WX Affinity
192.168.14.2
192.168.14.4
192.168.14.2
192.168.14.4
192.168.14.2
192.168.14.2
192.168.14.2
192.168.14.4
192.168.14.2
Description
VLAN name.
System IP address of the wireless LAN switch on which the
VLAN is configured.
Preference of this WX switch for forwarding user traffic for
the VLAN. A higher number indicates a greater preference.
5
5
5
5
5
5
5
5
5