Md5; Mkdir - 3Com WX4400 Command Reference Manual

md5

mkdir

Calculates the MD5 checksum for a file in the switch's nonvolatile
storage.
Syntax —
md5 [boot0: | boot1:]filename
boot0: | boot1:
— Name of the file.
filename
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Usage — You must include the boot partition name in front of the
filename. If you specify only the filename, the CLI displays a message
stating that the file does not exist.
Examples — The following command calculates the checksum for image
file WX040003.020 in boot partition 0:
pubs# md5 boot0:MX040003.020
MD5 (boot0:MX040003.020) = b9cf7f527f74608e50c70e8fb896392a
See Also
copy on page 615
dir on page 618
Creates a new subdirectory in nonvolatile storage.
Syntax —
mkdir [subdirname]
— Subdirectory name. Specify between 1 and 32
subdirname
alphanumeric characters, with no spaces.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
— Boot partition into which you copied the file.
md5 629