Set Service-Profile Soda Agent-Directory - 3Com WX4400 Command Reference Manual

set service-profile
soda
agent-directory
Defaults — The default short unicast retry threshold is 5 attempts.
Examples — Enabled.
History —Introduced in MSS Version 4.2.
Examples — The following command changes the short retry threshold
for service profile sp1 to 3:
WX4400# set service-profile sp1 short-retry-count 3
success: change accepted.
See Also
display service-profile on page 330
set radio-profile frag-threshold on page 376
set service-profile long-retry-count on page 406
Specifies the directory on the WX switch where the SODA agent files for
a service profile are located.
Syntax — set service-profile name soda agent-directory
directory
name — Service profile name.
directory — Directory on the WX switch for SODA agent files.
Defaults — By default, the WX switch expects SODA agent files to be
located in a directory with the same name as SSID.
Access — Enabled.
History —Introduced in MSS Version 4.2.
Usage — If the same SODA agent is used for multiple service profiles,
you can use this command to specify a single directory for SODA agent
files on the WX switch, rather than placing the same SODA agent files in
a separate directory for each service profile.

set service-profile soda agent-directory

413