Set Service-Profile Cipher-Tkip - 3Com WX4400 Command Reference Manual

400 C 11: M
HAPTER
set service-profile
cipher-tkip
A P C
ANAGED CCESS OINT OMMANDS
Disables or reenables Temporal Key Integrity Protocol (TKIP) encryption in
a service profile.
Syntax —
set service-profile
name cipher-tkip {enable | disable}
— Service profile name.
name
— Enables TKIP encryption for WPA clients.
enable
— Disables TKIP encryption for WPA clients.
disable
Defaults — When the WPA IE is enabled, TKIP encryption is enabled by
default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — To use TKIP, you must also enable the WPA IE.
Examples — The following command disables TKIP encryption in service
profile sp2:
WX4400# set service-profile sp2 cipher-tkip disable
success: change accepted.
See Also
display service-profile on page 330
set service-profile cipher-ccmp on page 399
set service-profile cipher-wep104 on page 402
set service-profile cipher-wep40 on page 401
set service-profile tkip-mc-time on page 422
set service-profile wpa-ie on page 433