Display Service-Profile - 3Com WX4400 Command Reference Manual

330 C 11: M
HAPTER
display
service-profile
A P C
ANAGED CCESS OINT OMMANDS
set radio-profile auto-tune channel-interval on page 369
set radio-profile auto-tune power-backoff- timer on page 370
set radio-profile auto-tune power-config on page 371
set radio-profile auto-tune power-interval on page 372
set radio-profile beacon-interval on page 373
set radio-profile countermeasures on page 374
set radio-profile dtim-interval on page 375
set radio-profile frag-threshold on page 376
set radio-profile max-rx-lifetime on page 378
set radio-profile max-tx-lifetime on page 379
set radio-profile mode on page 380
set radio-profile preamble-length on page 382
set radio-profile qos-mode on page 383
set radio-profile rts-threshold on page 384
set radio-profile service-profile on page 385
Displays service profile information.
Syntax — display service-profile {name | ?}
name — Displays information about the named service profile.
? — Displays a list of service profiles.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. New fields added to indicate
the configured SSID default attributes in the service profile. Version 4.2
added the following fields:
Proxy ARP
DHCP restrict
No broadcast
Short retry limit (moved from display radio-profile output)