Set System Contact; Set System Location; Set System Countrycode - 3Com WX4400 Command Reference Manual

set system contact

Stores a contact name for the WX switch.
Syntax —
set system contact string
— Alphanumeric string up to 256 characters long, with no
string
blank spaces.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
To view the system contact string, type the display system command.
Examples — The following command sets the system contact
information to tamara@example.com:
WX1200# set system contact tamara@example.com
success: change accepted.
See Also
clear system on page 42
display system on page 45
set system location on page 64
set system name on page 65

set system contact

57