Display Location Policy - 3Com WX4400 Command Reference Manual

228 C 8: AAA C
HAPTER
display location
policy
Id Clauses
----------------------------------------------------------------
1) deny if user eq *.theirfirm.com
2) permit vlan guest_1 if vlan neq *.wodefirm.com
3) permit vlan bld4.tac inacl tac_24.in if user eq *.ny.wodefirm.com
OMMANDS
Table 42 display accounting statistics Output (continued)
Acct-Output-Packets Number of packets the WX switch has sent during the
Acct-Input-Packets
Vlan-Name
Calling-Station-Id
Nas-Port-Id
Called-Station-Id
See Also
clear accounting on page 207
display aaa on page 223
set accounting {admin | console} on page 229
Displays the list of location policy rules that make up the location policy
on an WX switch.
Syntax —

display location policy

Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command displays the list of location policy
rules in the location policy on an WX switch:
WX4400 display location policy
See Also
clear location policy on page 214
set location policy on page 248
session.
Number of packets the WX switch has received during the
session.
Name of the client's VLAN.
MAC address of the supplicant (client).
Number of the port and radio on the MAP access point
through which the session was conducted.
MAC address of the MAP access point through which the
client reached the network.