Display Dhcp-Server - 3Com WX4400 Command Reference Manual

144 C 7: IP S
HAPTER

display dhcp-server

C
ERVICES OMMANDS
Displays MSS DHCP server information.
Syntax —
display dhcp-server [interface vlan-id] [verbose]
interface vlan-id
specified VLAN.
— Displays configuration and status information for the MSS
verbose
DHCP server.
Defaults — None.
Access — All.
History — Introduced in MSS Version 4.0.
Examples — The following command displays the addresses leased by
the MSS DHCP server:
WX1200# display dhcp-server
VLAN Name
----------
1 default
1 default
2 red-vlan
2 red-vlan
The following command displays configuration and status information for
each VLAN on which the DHCP server is configured:
WX1200# display dhcp-server verbose
Interface:
Status:
Address Range:
Interface:
Status:
Address Range:
DHCP Clients:
Hardware Address:
State:
Lease Allocation:
Lease Remaining:
IP Address:
Subnet Mask:
— Displays the IP addresses leased by the
Address MAC
-------- ----------- -------------------------
10.10.20.2 00:01:02:03:04:05
10.10.20.3 00:01:03:04:06:07
192.168.1.5 00:01:03:04:06:08
192.168.1.7 00:01:03:04:06:09
0 (Direct AP)
UP
10.0.0.1-10.0.0.253
default(1)
UP
10.10.20.2-10.10.20.254
00:01:02:03:04:05
BOUND
43200 seconds
12345 seconds
10.10.20.2
255.255.255.0
Lease Remaining (sec)
12345
2103
102
16789