Ip Services; Commands By Usage - 3Com WX4400 Command Reference Manual

7
Commands by
Usage
IP S
ERVICES
Use IP services commands to configure and manage IP interfaces,
management services, the Domain Name Service (DNS), Network Time
Protocol (NTP), and aliases, and to ping a host or trace a route.
This chapter presents IP services commands alphabetically. Use Table 27
to locate the commands in this chapter based on their use.
Table 27 IP Services Commands by Usage
Type
IP Interface
System IP Address
IP Route
SSH Management
Telnet Management set ip telnet on page 175
C
OMMANDS
Command
set interface on page 164
set interface dhcp-client on page 165
set interface status on page 167
display interface on page 146
display dhcp-client on page 142
clear interface on page 131
set system ip-address on page 196
clear system ip-address on page 140
set ip route on page 171
display ip route on page 150
clear ip route on page 134
set ip ssh server on page 175
set ip ssh on page 174
set ip telnet server on page 176
display ip telnet on page 152
clear ip telnet on page 135