Display Ip Route - 3Com WX4400 Command Reference Manual

150 C 7: IP S
HAPTER

display ip route

C
ERVICES OMMANDS
Table 35 Output for display ip https
Field
HTTPS is
enabled/disabled
HTTPS is set to use port TCP port number on which the WX switch listens for
Last 10 connections
IP Address
Last Connected
Time Ago (s)
See Also
clear ip telnet on page 135
display ip telnet on page 152
set ip https server on page 171
set ip telnet on page 175
set ip telnet server on page 176
Shows the IP route table.
Syntax — display ip route [destination]
destination
notation.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Description
State of the HTTPS server:
Enabled
Disabled
HTTPS connections.
List of the last 10 devices to establish connections to
the WX switch's HTTPS server.
IP address of the device that established the
connection.
If a browser connects to a WX switch from behind a
proxy, then only the proxy IP address is shown. If
multiple browsers connect using the same proxy, the
proxy address appears only once in the output.
Time when the WX switch established the HTTPS
connection to the WX switch.
Number of seconds since the device established the
HTTPS connection to the WX switch.
— Route destination IP address, in dotted decimal