3Com WX4400 Command Reference Manual page 292

292 C 11: M
HAPTER ANAGED
A P C
CCESS OINT OMMANDS
Table 49 Radio-Specific Parameters (continued)
channel
mode
radio-profile
tx-power
Access — Enabled
History —Introduced in MSS Version 3.0.
Usage — When you clear a radio, MSS performs the following actions:
Clears the transmit power, channel, and external antenna setting from
the radio.
Removes the radio from its radio profile and places the radio in the
default radio profile.
This command does not affect the PoE setting.
Examples — The following command disables and resets radio 2 on the
MAP access point connected to port 3:
WX1200# clear ap 3 radio 2
See Also
set {ap | dap} radio mode on page 360
set {ap | dap} radio radio-profile on page 362
set port type ap on page 95
802.11b — 6
802.11a — Lowest
valid channel number
for the country of
operation
disable
None. You must add the
radios to a radio profile.
Highest setting allowed for
the country of operation
or highest setting
supported on the
hardware, whichever is
lower.
Number of the channel in
which a radio transmits and
receives traffic
Operational state of the
radio.
802.11 settings
Transmit power of a radio, in
decibels referred to
1 milliwatt (dBm)