Clear History; Clear Prompt - 3Com WX4400 Command Reference Manual

clear history

clear prompt

Deletes the command history buffer for the current CLI session.
Syntax —
clear history
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — To clear the history buffer, type the following command:
WX4400# clear history
success: command buffer was flushed.
See Also
history on page 49
Resets the system prompt to its previously configured value. If the prompt
was not configured previously, this command resets the prompt to its
default.
Syntax —
clear prompt
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To reset the prompt, type the following command:
wildebeest# clear prompt
success: change accepted.
WX4400#
See Also
set prompt on page 56. (For information about default prompts, see
"Command Prompts" on page 26.)
clear history 41