3Com WX4400 Command Reference Manual page 492

492 C 14: S
HAPTER ECURITY
ACL C
OMMANDS
Syntax —
clear security acl map {acl-name | all} {vlan vlan-id |
port port-list [tag tag-value] | dap dap-num} {in | out}
acl-name — Name of an existing security ACL to clear. ACL names
start with a letter and are case-insensitive.
— Removes security ACL mapping from all physical ports, virtual
all
ports, and VLANs on a WX switch.
vlan vlan-id
ACL from the specified VLAN.
port port-list
specified WX physical port or ports.
tag tag-value
Specify a value from 1 through 4095. MSS removes the security ACL
from the specified virtual port.
— One or more Distributed MAPs, based on their
dap dap-num
connection IDs. Specify a single connection ID, or specify a
comma-separated list of connection IDs, a hyphen-separated range, or
any combination, with no spaces. MSS removes the security ACL from
the specified Distributed MAPs.
— Removes the security ACL from traffic coming into the WX
in
switch.
out — Removes the security ACL from traffic going out of the WX
switch.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — To clear a security ACL map, type the name of the ACL with the
VLAN, physical port or ports, virtual port tag, or Distributed MAP and the
direction of the packets to stop filtering. This command deletes the ACL
mapping, but not the ACL.
Examples — To clear the mapping of security ACL acljoe from port 4 for
incoming packets, type the following command:
WX4400# clear security acl map acljoe port 4 in
clear mapping accepted
— VLAN name or number. MSS removes the security
— Port list. MSS removes the security ACL from the
— Tag value that identifies a virtual port in a VLAN.