3Com WX4400 Command Reference Manual page 336

336 C 11: M
HAPTER ANAGED
A P C
CCESS OINT OMMANDS
Table 64 Output for display service-profile (continued)
Field
vlan-name,
session-timeout,
service-type
11a / 11b / 11g
transmit rate fields
See Also
set service-profile auth-dot1x on page 393
set service-profile auth-fallthru on page 394
set service-profile auth-psk on page 395
set service-profile auth-psk on page 395
set service-profile beacon on page 396
set service-profile cac-mode on page 397
set service-profile cac-session on page 398
set service-profile cipher-ccmp on page 399
set service-profile cipher-tkip on page 400
set service-profile cipher-wep104 on page 402
Description
These are examples of authorization attributes that are
applied by default to a user accessing the SSID managed by
this service profile (in addition to any attributes assigned to
the user by a RADIUS server or the local database).
Attributes are listed here only if they have been configured
as default attribute settings for the service profile.
See Table 43 on page 253 for a list of authorization
attributes and values that can be assigned to network users.
Data transmission rate settings for each radio type:
beacon rate—Data rate of beacon frames sent by MAP
radios.
multicast rate—Data rate of multicast frames sent by
MAP radios. If the rate is auto, the MAP sets the multicast
rate to the highest rate that can reach all clients
connected to the radio.
mandatory rates—Set of data transmission rates that
clients are required to support in order to associate with
an SSID on a MAP radio. A client must support at least
one of the mandatory rates.
standard rates—The set of valid rates that are neither
mandatory nor disabled. These rates are supported for
data transmission from the MAP radios.
disabled rates—Data transmission rates that MAP radios
will not use to transmit data. (The radios will still accept
frames from clients at disabled data rates.)