3Com WX4400 Command Reference Manual page 657

Table 110 describes the fields in this display.
Table 110 display snoop stats Output
Field Description
Filter Name of the snoop filter.
Dap Distributed MAP containing the radio to which the filter is
mapped.
Radio Radio to which the filter is mapped.
Rx Match Number of packets received by the radio that match the filter.
Tx Match Number of packets sent by the radio that match the filter.
Dropped Number of packets that matched the filter but that were not
copied to the observer due to memory or network problems.
Stop-After Filter state:
running—enabled
stopped—disabled
number-of-packets—If the filter is running and the
stop-after option was used to stop the filter, this field
displays the number of packets that still need to match
before the filter is stopped.
display snoop stats 657