3Com WX4400 Command Reference Manual page 107

WX4400# display fdb all
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG Dest MAC/Route Des [CoS]
---- ---- ------------------ -----
1 00:01:97:13:0b:1f
1 aa:bb:cc:dd:ee:ff
1 00:0b:0e:02:76:f5
Total Matching FDB Entries Displayed = 3
WX4400# display fdb 00:*
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG Dest MAC/Route Des [CoS]
---- ---- ------------------ -----
1 00:01:97:13:0b:1f
1 00:0b:0e:02:76:f5
Total Matching FDB Entries Displayed = 2
Access — All.
History —Introduced in MSS Version 3.0.
Usage — To display the entire forwarding database, enter the display fdb
command without options. To display only a portion of the database, use
optional parameters to specify the types of entries you want to display.
Examples — The following command displays all entries in the
forwarding database:
*
The top line of the display identifies the characters to distinguish among
the entry types.
The following command displays all entries that begin with the MAC
address glob 00:
Table 20 describes the fields in the display fdb output.
Table 20 Output for display fdb
Field
VLAN
TAG
Dest MAC/Route Des
Destination Ports
-----------------------------------------
1
3
1
Destination Ports
-----------------------------------------
1
1
Description
VLAN number.
VLAN tag value. If the interface is untagged, the TAG field
is blank.
MAC address of this forwarding entry's destination.
display fdb 107
[Protocol Type]
[ALL]
[ALL]
[ALL]
[Protocol Type]
[ALL]
[ALL]