Display Radio-Profile - 3Com WX4400 Command Reference Manual

display
radio-profile
WX4400# display radio-profile default
Beacon Interval:
Max Tx Lifetime:
RTS Threshold:
Long Preamble:
Tune Power:
Tune Power Interval: 600
Power Backoff Timer: 10
Active-Scan:
Displays radio profile information.
Syntax —
display radio-profile {name | ?}
— Displays information about the named radio profile.
name
— Displays a list of radio profiles.
?
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Name of the backoff timer
field changed from Client Backoff Timer to Power Backoff Timer and new
fields added in MSS Version 4.0:
Countermeasures
Active-Scan
WMM enabled
Version 4.2 has the following changes:
WMM enabled field renamed to QoS Mode.
Long Retry Limit and Short Retry Limit fields moved to show
service-profile output. (These options are now configurable on a
service-profile basis instead of a radio-profile basis.)
Allow 802.11g clients only field removed. (This option is now
configured using the set service-profile transmit-rates command.)
Usage — MSS contains a default radio profile. 3Com recommends that
you do not change this profile but instead keep the profile for reference.
Examples — The following command shows radio profile information
for the default radio profile:
100 DTIM Interval:
2000 Max Rx Lifetime:
2346 Frag Threshold:
no Tune Channel:
no Tune Channel Interval:
Channel Holddown:
Countermeasures:
yes QoS Mode:

display radio-profile

1
2000
2346
yes
3600
300
none
wmm
327