Display Port-Group - 3Com WX4400 Command Reference Manual

74 C 4: P
HAPTER ORT
WX1200> display port counters octets port 3
Port Status
=============================================================================
3 Up

display port-group

C
OMMANDS
receive-etherstats
packets.
transmit-etherstats
packets.
port port-list
list, MSS shows statistics for all ports.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Usage — You can specify one statistic type with the command.
Examples — The following command shows octet statistics for port 3:
This command's output has the same fields as the monitor port counters
command. For descriptions of the fields, see Table 16 on page 82.
See Also
clear port counters on page 69
monitor port counters on page 80
Shows port group information.
Syntax — display port-group [name group-name]
name group-name
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0. In Version 4.2 the option all
was removed for simplicity. You can display information for all groups by
entering the command without specifying a group name.
— Shows Ethernet statistics for received
— Shows Ethernet statistics for transmitted
— List of physical ports. If you do not specify a port
Rx Octets
27965420
— Shows information for the specified port group.
Tx Octets
34886544