Set Trace Sm - 3Com WX4400 Command Reference Manual

set trace sm

Traces session manager activity.
Syntax —
set trace sm [mac-addr mac-address] [port port-num]
[user username] [level level]
mac-addr mac-address
address, using colons to separate the octets (for example,
00:11:22:aa:bb:cc).
— Traces on a WX port number.
port port-num
— Traces a user. Specify a username of up to
user username
80 alphanumeric characters, with no spaces.
level level — Determines the quantity of information included in
the output. You can set the level with an integer from 1 to 10, where
level 10 provides the most information. Levels 1 through 5 provide
user-readable information. If you do not specify a level, level 5 is the
default.
Defaults — The default trace level is 5.a
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to trace session manager
activity for MAC address 00:01:02:03:04:05:
WX4400# set trace sm mac-addr 00:01:02:03:04:05:
success: change accepted.
See Also
clear trace on page 640
display trace on page 641
— Traces a MAC address. Specify a MAC
set trace sm 645