Quality Of; Commands By Usage - 3Com WX4400 Command Reference Manual

6
6
Commands by
Usage
Q
UALITY OF
Use Quality of Service (QoS) commands to configure packet prioritization
in MSS. Packet prioritization ensures that WX switches and MAP access
points give preferential treatment to high-priority traffic such as voice and
video.
(To override the prioritization for specific traffic, use access controls lists
[ACLs] to set the Class of Service [CoS] for the packets. See "Security ACL
Commands" on page 489.)
This chapter presents QOS commands alphabetically. Use Table 26 to
locate commands in this chapter based on their use.
Table 26 QOS Commands by Usage
Type
QOS Settings
S
ERVICE
Command
display qos on page 127
display qos dscp-table on page 128
set qos cos-to-dscp-map on page 125
set qos dscp-to-cos-map on page 126
clear qos on page 124
C
OMMANDS