3Com WX4400 Command Reference Manual page 577

Wireless lan switch and controller
Hide thumbs Also See for WX4400:
Table of Contents

Advertisement

Table 93 display sessions network session-id Output (continued)
Field
Description
Session
Assigned session timeout in seconds.
Timeout
Authentication
Extensible Authentication Protocol (EAP) type used to authenticate
Method
the session user, and the IP address of the authentication server.
Session
Time the session statistics were last updated from the MAP access
statistics as
point, in seconds since a fixed standard date and time.
updated from
AP
Unicast packets
Total number of unicast packets received from the user by the WX
in
(64-bit counter).
Unicast bytes
Total number of unicast bytes received from the user by the WX
in
(64-bit counter).
Unicast packets
Total number of unicast packets sent by the WX to the user (64-bit
out
counter).
Unicast bytes
Total number of unicast bytes sent by the WX to the user (64-bit
out
counter).
Multicast
Total number of multicast packets received from the user by the
packets in
WX (64-bit counter).
Multicast bytes
Total number of multicast bytes received from the user by the WX
in
(64-bit counter).
Number of
Total number of decryption failures.
packets with
encryption
errors
Number of
Total number of bytes with decryption errors.
bytes with
encryption
errors
Last packet
Data transmit rate, in megabits per second (Mbps), of the last
data rate
packet received by the MAP access point.
Last packet
Signal strength, in decibels referred to 1 milliwatt (dBm), of the last
signal strength
packet received by the MAP access point.
Last packet
Signal-to-noise ratio of the last packet received by the MAP access
data S/N ratio
point.
See Also
clear sessions network on page 567
display sessions network
577

Advertisement

Table of Contents
loading

Table of Contents