Display Igmp Mrouter - 3Com WX4400 Command Reference Manual

470 C 13: IGMP S
HAPTER
display igmp
mrouter
WX1200# display igmp mrouter vlan orange
Multicast routers for vlan orange
Port Mrouter-IPaddr
---- --------------- ----------------- ----- -----
1 192.28.7.5 00:01:02:03:04:05 dvmrp
C
NOOPING OMMANDS
Table 75 Output for display igmp (continued)
Field
VLAN
IGMP is enabled
(disabled)
See Also
display igmp mrouter on page 470
display igmp querier on page 471
display igmp receiver-table on page 473
display igmp statistics on page 475
Displays the multicast routers in a WX's subnet, on one VLAN or all
VLANs. Routers are listed separately for each VLAN, according to the port
number through which the wireless LAN switch can reach the router.
Syntax — display igmp mrouter [vlan vlan-id]
vlan vlan-id
VLAN, MSS displays the multicast routers in all VLANs.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays the multicast routers in
VLAN orange:
Mrouter-MAC
Table 76 describes the fields in this display.
Description
VLAN name. MSS displays information separately for each
VLAN.
IGMP state.
— VLAN name or number. If you do not specify a
Type TTL
33