3Com WX4400 Command Reference Manual page 83

Table 16 Output for monitor port counters (continued)
Statistics Option Field
packets Rx Unicast
Rx
NonUnicast
Tx Unicast
Tx
NonUnicast
receive-errors Rx Crc
Rx Error
Rx Short
Rx Overrun
transmit-errors Tx Crc
Tx Short
Tx Fragment
Tx Abort
monitor port counters
Description
Number of unicast packets received.
This number does not include packets that
contain errors.
Number of broadcast and multicast packets
received.
This number does not include packets that
contain errors.
Number of unicast packets transmitted.
This number does not include packets that
contain errors.
Number of broadcast and multicast packets
transmitted.
This number does not include packets that
contain errors.
Number of frames received by the port that had
the correct length but contained an invalid
frame check sequence (FCS) value. This statistic
includes frames with misalignment errors.
Total number of frames received in which the
Physical layer (PHY) detected an error.
Number of frames received by the port that
were fewer than 64 bytes long.
Number of frames received by the port that
were valid but were longer than 1518 bytes.
This statistic does not include jumbo packets
with valid CRCs.
Number of frames transmitted by the port that
had the correct length but contained an invalid
FCS value.
Number of frames transmitted by the port that
were fewer than 64 bytes long.
Total number of frames transmitted that were
less than 64 octets long and had invalid CRCs.
Total number of frames that had a link pointer
parity error.
83