Set Ipx System; Set Network Service <Admin_Name - 3Com OfficeConnect Remote 812 Cli User's Manual

set ipx system

set network service
<admin_name>
rip_age_multiplier Number to multiply the rip_update_interval by, to obtain the value
for the aging out the entries in the RIP database.
rip_packet_size Size of RIP packets.
rip_update_interval How often RIP should send periodic updates.
sap Sets the SAP mode.
sap_age_multiplier Number to multiply the sap_update_interval by, to obtain the value
for aging out entries in the SAP database.
sap_packet_size Size of SAP packets.
sap_nearest_replies Whether or not SAP will look its nearest neighbors.
sap_update_interval How often RIP should send periodic updates.
priority [priority level]


default_gateway [ipx_host_add]


initial_pool_address [ipx_addr]


pool_members [number]


Sets parameters for dynamic IPX networks.
Parameters Description
priority Priority for the dynamic IPX network.
default_gateway Default router for the dynamic IPX network.
initial_pool_address Initial IPX address used to dynamically assign IPX network.
pool_members Number of addresses to reserve in the pool of IPX addresses used when
dynamically assigning IPX networks.
server_type [server_type]


socket [socket_number]


data ["string"]


close_active_connections [TRUE | FALSE]


Sets parameters for configured network services. You can list the configured
network services using list network services. The service must be disabled for this
command to work.
Parameters
<admin_name>
server_type
socket
Description
Designation you assigned to network service with the add
network service command. Limit of 32 characters.
Type of network service you wish to assign to this administration
name. Currently available services are:
TELNETD - TELNET server
HTML - for gathering statistics
SNMPD - SNMP agent
TFTPD - server for file transfers
Indicates which "socket" the server listens on. For TFTP and
TELNET, it is the TCP or UDP port number.
CLI Commands B-29