3Com WX4400 Command Reference Manual page 247

set authentication web 247
Usage — You can configure different authentication methods for
different groups of users by "globbing." (For details, see "User Globs" on
page 28.)
You can configure a rule either for wireless access to an SSID, or for wired
access through a WX switch's wired authentication port. If the rule is for
wireless access to an SSID, specify the SSID name or specify any to match
on all SSID names. If the rule is for wired access, specify wired instead of
an SSID name.
If you specify multiple authentication methods in the set authentication
web command, MSS applies them in the order in which they appear in
the command, with these results:
If the first method responds with pass or fail, the evaluation is final.
If the first method does not respond, MSS tries the second method, and
so on.
However, if local appears first, followed by a RADIUS server group, MSS
overrides any failed searches in the local WX database and sends an
authentication request to the server group.
MSS uses a WebAAA rule only under the following conditions:
The client is not denied access by 802.1X or does not support 802.1X.
The client's MAC address does not match a MAC authentication rule.
The fallthru method is web. (For a wireless authentication rule, the
fallthru method is specified by the set service-profile auth-fallthru
command. For a wired authentication rule, the fallthru method is
specified by the auth-fall-thru option of the set port type wired-auth
command.)
Examples — The following command configures a WebAAA rule in the
local WX database for SSID ourcorp and userglob rnd*:
WX4400# set authentication web ssid ourcorp rnd* local
success: change accepted.
See Also
clear authentication proxy on page 213