Clear Dot1X Max-Req; Clear Dot1X Port-Control - 3Com WX4400 Command Reference Manual

Wireless lan switch and controller
Hide thumbs Also See for WX4400:
Table of Contents

Advertisement

clear dot1x max-req

clear dot1x
port-control
See Also
display dot1x on page 551
set dot1x bonded-period on page 555
Resets to the default setting the number of Extensible Authentication
Protocol (EAP) requests that the WX switch retransmits to a supplicant
(client).
Syntax —
clear dot1x max-req
Defaults — The default number is 20.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To reset the number of 802.1X requests the WX can send
to the default setting, type the following command:
WX4400# clear dot1x max-req
success: change accepted.
See Also
display dot1x on page 551
set dot1x max-req on page 557
Resets all wired authentication ports on the WX switch to default 802.1X
authentication.
Syntax —

clear dot1x port-control

By default, all wired authentication ports are set to auto and they process
authentication requests as determined by the set authentication dot1X
command.
Access — Enabled.
History —Introduced in MSS Version 3.0.
clear dot1x max-req
547

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WX4400 and is the answer not in the manual?

Questions and answers

Table of Contents