3Com WX4400 Command Reference Manual page 552

552 C 17: 802.1X M
HAPTER
WX4400# display dot1x clients
MAC Address
-------------
00:20:a6:48:01:1f
00:05:3c:07:6d:7c
00:05:5d:7e:94:83
00:02:2d:86:bd:38
00:05:5d:7e:97:b4
00:05:5d:7e:98:1a
00:0b:be:a9:dc:4e
00:05:5d:7e:96:e3
00:02:2d:6f:44:77
00:05:5d:7e:94:89
00:06:80:00:5c:02
00:02:2d:6a:de:f2
00:02:2d:5e:5b:76
00:02:2d:80:b6:e1
00:30:65:16:8d:69
00:02:2d:64:8e:1b
WX1200# display dot1x config
802.1X user policy
----------------------
'host/bob-laptop.mycorp.com' on ssid 'mycorp' doing PASSTHRU
'bob.mycorp.com' on ssid 'mycorp' doing PASSTHRU (bonded)
C
ANAGEMENT OMMANDS
History —Introduced in MSS Version 3.0. Format of 802.1X
authentication rule information in
changed in MSS Version 3.2. The rules are still listed at the top of the
display, but more information is shown for each rule.
Examples — Type the following command to display the 802.1X clients:
State
-------
Connecting
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Authenticated
Type the following command to display the 802.1X configuration:
display dot1x config
Vlan
------
(unknown)
vlan-it
vlan-eng
vlan-eng
vlan-eng
vlan-eng
vlan-pm
vlan-eng
vlan-eng
vlan-eng
vlan-eng
vlan-pm
vlan-pm
vlan-cs
vlan-wep
vlan-eng
output
Identity
----------
EXAMPLE\jose
EXAMPLE\singh
bard@xmple.com
EXAMPLE\havel
EXAMPLE\nash
xalik@xmple.com
EXAMPLE\mishan
EXAMPLE\ethan
EXAMPLE\fmarshall
EXAMPLE\bmccarthy
neailey@xmple.com
EXAMPLE\tamara
dmc@xmple.com
MAC authenticated
EXAMPLE\wong