3Com WX4400 Command Reference Manual page 417

Access — Enabled.
History —Introduced in MSS Version 4.2.
Usage — When a client closes the SODA virtual desktop, the client is
automatically disconnected from the network. You can use this
command to specify a page that is loaded when the client closes the
SODA virtual desktop.
The client can request this page at any time, to ensure that the client's
session has been terminated. You can add the IP address of the WX
switch to the DNS server as a well-known name, and you can advertise
the URL of the page to users as a logout page.
The page is assumed to reside in the root directory on the WX switch.
You can optionally specify a different directory where the page resides.
For the logout page to load properly, you must enable the HTTPS server
on the WX switch, so that clients can access the page using HTTPS. To do
this, use the set ip https server enable command.
Examples — The following command specifies logout.html as the page
to load when a client closes the SODA virtual desktop:
WX4400# set service-profile sp1 soda logout-page logout.html
success: change accepted.
The following command specifies logout.html, in the soda-files directory,
as the page to load when a client closes the SODA virtual desktop:
WX4400# set service-profile sp1 soda logout-page
soda-files/logout.html
success: change accepted.
See Also
set ip https server on page 171
display service-profile on page 330
set service-profile soda logout-page 417