3Com WX4400 Command Reference Manual page 468

468 C 13: IGMP S
HAPTER
C
NOOPING OMMANDS
Table 75 describes the fields in this display.
Table 75 Output for display igmp
Field
VLAN
IGMP is enabled
(disabled)
Proxy reporting
Mrouter solicitation
Querier functionality
Configuration values
(qi)
Configuration values
(oqi)
Configuration values
(qri)
Configuration values
(lmqi)
Configuration values
(rvalue)
Multicast router
information
Port
Mrouter-IPaddr
Mrouter-MAC
Type
Description
VLAN name. MSS displays information separately for each
VLAN.
IGMP state.
Proxy reporting state.
Multicast router solicitation state.
Pseudo-querier state.
Query interval.
Other-querier-present interval.
Query response interval.
Last member query interval.
Robustness value.
List of multicast routers and active multicast groups. The
fields containing this information are described separately.
The display igmp mrouter command shows the same
information.
Number of the physical port through which the WX can
reach the router.
IP address of the multicast router interface.
MAC address of the multicast router interface.
How the WX learned that the port is a multicast router port:
conf — Static multicast port configured by an
administrator
madv — Multicast advertisement
quer — IGMP query
dvmrp — Distance Vector Multicast Routing Protocol
(DVMRP)
pimv1 — Protocol Independent Multicast (PIM)
version 1
pimv2 — PIM version 2