3Com WX4400 Command Reference Manual page 180

Wireless lan switch and controller

Hide thumbs Also See for WX4400:

Table of Contents

— Allows an SNMP management application using the

string to get object values on the switch but not to set them. The

switch can use the string to send notifications.

— Allows the switch to use the string to send

notifications.

— Allows an SNMP management application using the

string to get and set object values on the switch.

notify-read-write

using the string to get and set object values on the switch. The switch

also can use the string to send notifications.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0. Default community strings

changed from public (for read-only) and private (for read-write) to blank

in MSS Version 3.1. Default strings removed and new access types added

for SNMPv3 (read-notify, notify-only, notify-read-write) in MSS Version

Usage — SNMP community strings are passed as clear text in SNMPv1

and SNMPv2c. 3Com recommends that you use strings that cannot easily

be guessed by unauthorized users. For example, do not use the

well-known strings public and private.

If you are using SNMPv3, you can configure SNMPv3 users to use

authentication and to encrypt SNMP data.

Examples — The following command configures the read-write

community good_community:

WX4400# set snmp community read-write good_community

success: change accepted.

The following command configures community string switchmgr1 with

access level notify-read-write:

WX4400# set snmp community name switchmgr1 notify-read-write

success: change accepted.

Chapters

Table of Contents