Set Dot1X Authcontrol - 3Com WX4400 Command Reference Manual

554 C 17: 802.1X M
HAPTER
set dot1x
authcontrol
C
ANAGEMENT OMMANDS
Table 87 display dot1x stats Output
Field
Enters Connecting
Logoffs While
Connecting
Enters Authenticating Number of times that the state wildcard transitions.
Success While
Authenticating
Timeouts While
Authenticating
Failures While
Authenticating
Reauths While
Authenticating
Starts While
Authenticating
Logoffs While
Authenticating
Bad Packets Received Number of EAPoL packets received that have an invalid
Provides a global override mechanism for 802.1X authentication
configuration on wired authentication ports.
Syntax — set dot1x authcontrol {enable | disable}
enable — Allows all wired authentication ports running 802.1X to
use the authentication specified per port by the set dot1X
port-control command.
— Forces all wired authentication ports running 802.1X to
disable
unconditionally accept all 802.1X authentication attempts with an
EAP Success message (ForceAuth).
Description
Number of times that the WX switch state transitions to the
CONNECTING state from any other state.
Number of times that the WX switch state transitions from
CONNECTING to DISCONNECTED as a result of receiving an
EAPoL-Logoff message.
Number of times the WX switch state transitions from
AUTHENTICATING from AUTHENTICATED, as a result of an
EAP-Response/Identity message being received from the
supplicant (client).
Number of times that the WX switch state wildcard
transitions from AUTHENTICATING to ABORTING.
Number of times that the WX switch state wildcard
transitions from AUTHENTICATION to HELD.
Number of times that the WX switch state wildcard
transitions from AUTHENTICATING to ABORTING, as a result
of a reauthentication request (reAuthenticate = TRUE).
Number of times that the WX switch state wildcard
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPoL-Start message being received from the
Supplicant (client).
Number of times that the WX switch state wildcard
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPoL-logoff message being received from the
Supplicant (client).
version or type.